UfS box flashing box is one of the top-rated and loved flashing boxes in the market. You can see the rating of this box in the field of flashing of the Android devices. You can flash your mobile phone with Stock firmware files or stock firmware files by using this interesting tool. So, tap the download button and get the UfS box setup from the link below, get the file and install it on your computer and start flashing on your mobile phone.
This UFS flashing box supports a variety of mobile phones, brands, and Android versions. With just one tap of the finger, you will get the latest upgraded flashed phone in your hands.
To flash your Android phone using the UFS box, you also are required to download and install the USB driver.
The link of the USB driver also has been given at the bottom, without of that USB driver; your mobile phone may not be able to connect with this flashing box.
Also Check: Miracle Box Latest Setup
To flash your phone via this box, you need to take care of something. Like, before flashing of the phone, you should create a backup disk. Like, if the process goes wrong and you ended at a closed-door, you might be able to restore the data to flash the phone all over again.
Or if you are trying to get custom recovery of your phone, create the backup.
Before connecting your mobile phone to this box, enable the USB debugging of the phone. As, sometimes, you made a setting not acceptable for any OS, so, go to the setting, see the developer option, and enable the USB debugging on the phone.
If you want to flash your mobile phone with the custom or stock ROM, but do not know how to do it, follow the steps which I am going to narrate in the next few lines.
First, remove your batter from the mobile phone
Enable the USB debugging, install the UFS box setup and USB driver properly and restart the computer at least once.
Now, pick a data cable, it would be ideal if you got a genuine one
Now, connect one side of the data cable with the phone and the other side with the computer, in which you already have installed the setup and drivers, etc.
The mobile phone should be off, with the removed battery
Now, when you had connected the phone, with the UFB Flashing box, there will be a screen on your computer showing the basic info and mobile phone brand etc.
Now, you should have the firmware files on your computer with which you are going to flash your mobile phone.
Now, press the button of scattered files on your computer, it will take you to the place, where you have downloaded the flashing files on your computer
Open the files load the files and start flashing the phone.
When you have loaded the flashing files, press the volume down or up button of your phone to enable the download mode
When the download mode is enabled, you will be able to flash the phone in moments
So, you can use the best interface for the UfS box setup to fix the issues on your mobile phone.
Tap the download button below and get the files, if the link is not working or showing any error, please mention it in the comment section.
Download UFS Box Panel Setup + Driver
| File | Link |
|---|---|
| UFS3_Panel_Setup | Download UFS Panel Setup |
| UFS_Box_all_drivers | Download UFS Drivers |